Preparation of measuring tools
Soft tape measure: This is the most commonly used measuring tool. The soft tape measure is soft in texture and can closely fit the wrist, so the measured data is relatively accurate. It is like a close-fitting "measurement assistant" that can easily circle around the wrist to obtain precise perimeter data.
String or paper strip: If you don't have a flexible ruler at hand, string or paper strip can also be used as an alternative tool. The thin rope should be chosen to be non-elastic, such as nylon rope, to avoid inaccurate measurement results due to elasticity. When choosing paper strips, it is advisable to select those that are relatively hard and not prone to deformation, such as those cut from cardboard.
Measurement methods and steps
Soft tape measure method
Find the correct measurement position: Bring your thumb and little finger as close inward as possible to keep your palm in a naturally relaxed state. At this point, measure the circumference of the thinnest part of the wrist. This position is usually a little above the wrist bone, just like "tailoring" a suitable "circle" for the wrist.
Read the data: Gently wrap a flexible tape measure around the thinnest part of your wrist once. Be careful not to make it too tight or too loose. It is appropriate to rotate the flexible tape measure easily without it slipping off. Then read the value at the point where the tape measure coincides with the starting point. This value is the circumference of the wrist, which is an important dimension we need to refer to when choosing a stone bracelet.
String or paper strip measurement method
Wrap your wrist: Bring your thumb and little finger together as well, and relax your palm. Wrap a thin string or a piece of paper around the thinnest part of your wrist and make marks at the starting and ending points, just like drawing an "invisible bracelet outline" for your wrist.
Measure the length: Remove the thin string or paper strip, lay it flat on the table, and measure the length between the marks with a ruler. This length is the circumference of the wrist.
Measurement Precautions
Take the average of multiple measurements: As the wrist may have slight dimensional changes in different states, for example, the wrist may be slightly swollen after exercise. To ensure the accuracy of the measurement results, it is recommended to measure 2 to 3 times at different times (such as morning, noon, and evening), and then take the average as the final wrist circumference data. This is like measuring the length of an object multiple times. Taking the average value can reduce errors and make the measurement results more reliable.
Consider wearing habits: Some people prefer to wear looser stone bracelets, feeling more comfortable and at ease. While some people prefer the style that fits closely to the wrist, which looks more exquisite. When measuring, adjust the size appropriately according to your own wearing habits. If you prefer a looser fit, you can increase the measured wrist circumference by 1 to 2 centimeters. If you prefer a tight fit, add 0.5 to 1 centimeter. This is just like buying shoes. Some people like loose ones, while others prefer those that fit well. You should choose the right size according to your own preferences.
Pay attention to seasonal factors: Changes in seasons can also affect the size of the wrist. In summer, when the temperature is relatively high, the blood circulation in the human body speeds up, and the wrists may become slightly swollen. In winter, the temperature is relatively low and the wrist may contract relatively. Therefore, when making measurements, seasonal factors should be taken into account. If the measurement is conducted in summer, the size can be appropriately increased a little. If it is measured in winter, the size can be slightly smaller. Just as the thickness of clothes should be chosen according to the season, the size of stone bracelets should also be adjusted appropriately according to the season.
Size conversion and bracelet selection
Size conversion: The measured wrist circumference is an important basis for choosing a stone bracelet, but the size marking methods for different styles of bracelets may vary. Generally speaking, there is a certain conversion relationship between the inner diameter of a bracelet and the circumference of the wrist. For example, when the wrist circumference is 16 centimeters, if you prefer a loose fit, you can choose a bracelet with an inner diameter of approximately 5.8-6 centimeters (divide the wrist circumference by 3.14 and add an appropriate amount of looseness). If you prefer to wear it tightly, you can choose a bracelet with an inner diameter of approximately 5.5 to 5.7 centimeters. This is like converting different length units, making it convenient for us to choose the appropriate size of the bracelet.
Bracelet styles and sizes: Different styles of bracelets have different requirements for sizes. For instance, round bar bracelets usually fit the wrist better, and the size selection can be relatively precise. However, due to the relatively wide shape of the flat bracelet, there may be some room for movement when wearing it, so the size can be chosen to be a little looser. Just as different styles of clothes have different cuts and fit different body shapes, the style of bracelets will also affect the choice of size.
